ZR-1 Net Registry Forums - Delco Bose AUX Input soldered connection...

Page 4 of 4

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Delco Bose AUX Input soldered connection... (http://zr1.net/forum/showthread.php?t=19620)

scottfab

03-09-2014 09:12 AM

Re: Delco Bose AUX Input soldered connection...

According to what I see pin 1 is shorted to pin 4 ?
Pin 4 is "Right channel In" and pin 1 is "Ground".
I'm a bit confused.

Quote:

Originally Posted by Schrade (Post 165072)

...snip...

3.5MM jack soldered to shielded cable:
excess on terminal #1 snipped; no 2-4 bridge!!!

https://lh3.googleusercontent.com/-V.../IMG_5118c.JPG

jack pinout ID:

https://lh3.googleusercontent.com/-U...rigger_dev.jpg

Schrade

03-09-2014 10:56 AM

Re: Delco Bose AUX Input soldered connection...

I should have said "no 1 - 4 bridge".

Quote:

3.5MM jack soldered to shielded cable:
excess on terminal #1 snipped; no 2-4 bridge!!!.

scottfab

03-09-2014 01:01 PM

Re: Delco Bose AUX Input soldered connection...

Quote:

Originally Posted by Schrade (Post 197657)

I should have said "no 1 - 4 bridge".

OH ok.... then it looks like this then with a ground going to pin 1 only.
And the ground is the audio ground and not the car ground.

http://zr1.net/forum/picture.php?alb...pictureid=2487

All times are GMT -4. The time now is 07:16 PM.

Page 4 of 4