ZR-1 Net Registry Forums
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   Fuel Sending Unit (http://zr1.net/forum/showthread.php?t=29028)

spork2367 04-20-2018 02:58 PM
Re: Fuel Sending Unit
 
Quote:
Originally Posted by A26B (Post 277772)
Check the socks, both of them. The last batch of senders we received had split/torn filter socks. Since you probably can't get a replacement for the long one, may have to reuse the old one or go with a standard, short one. Not a problem if you do.
Do you know what the AC Delco TS number is for the original long sock with the hole in the end?

PhillipsLT5 04-20-2018 06:19 PM
Re: Fuel Sending Unit
 
ACDELCO TS1
ACDELCO TS3
ACDELCO G1
AIRTEX E3240
AIRTEX E3240

spork2367 04-20-2018 06:37 PM
Re: Fuel Sending Unit
 
1 Attachment(s)
Quote:
Originally Posted by PhillipsLT5 (Post 277957)
ACDELCO TS1
ACDELCO TS3
ACDELCO G1
AIRTEX E3240
AIRTEX E3240
While the ts3 fits and works, it’s not technically correct. The end seams on the original are rotated 90 degrees from each other and the far end has a hole to go over a pin on the housing.

jss06c6 04-21-2018 07:58 AM
Re: Fuel Sending Unit
 
Gents,

Has anyone upgraded the pumps to the Racetronix (Walbro) 255? Higher flowrate I believe and good quality.

Sent from my QTAIR7 using ZR-1 Net Registry mobile app

jss06c6 04-23-2018 09:30 PM
Re: Fuel Sending Unit
 
New ACDelco fuel pump/sending unit got here today. Long sock is torn at the bottom heat fusion joint! Guess I'll try to get a replacement, or maybe I can get them t send me a new long sock/strainer? No guarantee that the replacement won't be torn too..same type as in the pic from spork2367 above.

Sent from my XT1585 using ZR-1 Net Registry mobile app

jss06c6 04-23-2018 09:38 PM
Re: Fuel Sending Unit
 
Quote:
Originally Posted by A26B (Post 277772)
Check the socks, both of them. The last batch of senders we received had split/torn filter socks. Since you probably can't get a replacement for the long one, may have to reuse the old one or go with a standard, short one. Not a problem if you do.
Jerry,

This is the exact problem I just encountered with a new unit. If I can't get a proper replacement, I'm tempted to reuse the sock from the one I just repaired..

Sent from my XT1585 using ZR-1 Net Registry mobile app

spork2367 04-23-2018 09:58 PM
Re: Fuel Sending Unit
 
Quote:
Originally Posted by jss06c6 (Post 278107)
New ACDelco fuel pump/sending unit got here today. Long sock is torn at the bottom heat fusion joint! Guess I'll try to get a replacement, or maybe I can get them t send me a new long sock/strainer? No guarantee that the replacement won't be torn too..same type as in the pic from spork2367 above.

Sent from my XT1585 using ZR-1 Net Registry mobile app
Quote:
Originally Posted by jss06c6 (Post 278108)
Jerry,

This is the exact problem I just encountered with a new unit. If I can't get a proper replacement, I'm tempted to reuse the sock from the one I just repaired..

Sent from my XT1585 using ZR-1 Net Registry mobile app
I can’t find the correct long one anywhere. The place you bought it from is just a middle man warehouse, they won’t be any help. The TS3 is close dimensionally. If the old one isn’t brittle I’d just use that.

jss06c6 04-23-2018 10:18 PM
Re: Fuel Sending Unit
 
Quote:
Originally Posted by spork2367 (Post 278110)
I can’t find the correct long one anywhere. The place you bought it from is just a middle man warehouse, they won’t be any help. The TS3 is close dimensionally. If the old one isn’t brittle I’d just use that.
Ok.. thanks.

Sent from my XT1585 using ZR-1 Net Registry mobile app

jss06c6 04-24-2018 08:24 AM
Re: Fuel Sending Unit
 
1 Attachment(s)
Torn sock as received.. will put Racetronix socks on the unit..[ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app

spork2367 04-24-2018 09:34 AM
Re: Fuel Sending Unit
 
Quote:
Originally Posted by jss06c6 (Post 278126)
Torn sock as received.. will put Racetronix socks on the unit..[ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app
You could try heating up two pieces of metal and melting the end back together further back.


All times are GMT -4. The time now is 02:52 PM.
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025