ZR-1 Net Registry Forums - Headers & exhaust

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Headers & exhaust (http://zr1.net/forum/showthread.php?t=22118)

Re: Headers & exhaust

Quote:

Originally Posted by TomZR1 (Post 195652)

I know what you guys are thinking ,install them your self ,hell no it looks like a pain in the azz,not going to start something that i can't finish.

I think you can do this with 1 hand. If you we're gonna' do the PS hoses, you can do the pipes...

Re: Headers & exhaust

they look great!! You will love these and they will tuck in nicely under your car. Congratulations on your purchase.

ed ramos #3028

Re: Headers & exhaust

Quote:

Originally Posted by TomZR1 (Post 195840)

got my exhaust,they look awsome!!!!!!!!:-D

If you don’t mind me asking... what diameter is the y-pipe where it goes into the resonator ?

Re: Headers & exhaust

Don't know, I'll measure & let know

Re: Headers & exhaust

thank you very much :cheers:

Re: Headers & exhaust

Quote:

Originally Posted by WARP TEN (Post 195097)

George, this is exactly what I went through. Primarily Corsas over the years but just got tired of the Loud. I have headers, no cats and last year had Marc reinstall my stock '95 system from the headers back. The only difference is I had him add electric QTP cutouts and I installed a rocker switch hidden under the carpet on the right side of the console. The only issue is I had to sacrifice the spare tire carrier. On longer trips away from home I carry the spare in the back. I added small tips to direct the exhaust to the side. So far I like the setup a lot. It is stock quiet when I want and when open I can scare children and pets and set off car alarms. I normally run slightly open for a little rumble.--Bob

This what is inside of your stock mufflers. Just in case you or anybody else was wondering. 2.75" shrinks down to 2.25" at the outlet. No wonder muffler swap gains good power improvement. I'm doing the same mod with my B&Bs.
http://i69.photobucket.com/albums/i6...ps25a6482c.jpg

Re: Headers & exhaust

Quote:

Originally Posted by TomZR1 (Post 195949)

11inches

How large is the inlet pipe where the two pipes meet and enter the resonator... 3.5"??? Can't be 11"

Re: Headers & exhaust

Quote:

Originally Posted by pushrod-v8 (Post 196156)

How large is the inlet pipe where the two pipes meet and enter the resonator... 3.5"??? Can't be 11"

Just checked mine, 3.5" across, 11" if you wrap the tape around the pipe.