Re: Delamination Poll
 

My 92 had delamination around the edges, not too bad. Replaced it after a stone put a crack in it with one of the $2500 ZR-1 aftermarket replacements with the cutout. Insurance paid for it after a 2 month battle of explaining that they have to replace factory spec if available and yes it is aftermarket, not OEM. If OEM they wanted me to pay the difference but I was able to prove that this is what they had to provide.

Re: Delamination Poll
 

Isn't it true that an original ZR-1 windshield can cost upwards of $ 3,000 dollars? My 91 came with a replacement windshield...

Re: Delamination Poll
 

I do not believe any original ZR-1 windshields are available but there is aftermarket clone with the correct cutout available at a cost of around $2500. A regular C4 windshield which will also fit but without the cutout is less than $500

Re: Delamination Poll
 

Upon replacing my WS, I found many places that were willing to make the attempt on my C4. But, don't be surprised when they find out it is a C4 Corvette; many WS installation sources will not do a C4 (I found).

Safelite installed my (standard C4) WS, but I had to goto a specific (brick and mortar) location where a person experienced with C4s was located and would do the job.

Re: Delamination Poll
 

I have a 1991 with delamination. About an inch coming from the edges. Passed Virgina Safety Inspection ok last fall.
Will leave as is if it stays contained.

Re: Delamination Poll
 

94 has substantial delam. Sold a 91 last year with the same. New owner replaced with a standard C4 windshield.

Sent from my SM-G930V using ZR-1 Net Registry mobile app

Re: Delamination Poll
 

Thanks for sharing. What were the pieces you couldn’t locate for the replacement?


Sent from my iPhone using ZR-1 Net Registry

Re: Delamination Poll
 

Most likely these were to 3 pieces of exposed trim going around the WS. At one point I bought all 3 piece,almost $900, for the 3 pieces and 2 of the 3 were of such poor quality I got a refund on them but still have one side piece somewhere. It’s very difficult to get this aluminum trim off the car without destroying it but it is possible.

Re: Delamination Poll
 

You’re welcome. Yes, just as Jeff said it was those three pieces of metal trim around the windshield. I was not able to find new and mine were perfect so I just told the installers to carefully replace. They did a great job in saving it and reusing.
Attachment 10563


Sent from my iPhone using ZR-1 Net Registry

Re: Delamination Poll
 

Wow! Awesome not seeing that delamination!


Sent from my iPhone using ZR-1 Net Registry