Little White hose Clip thingy
 

Any else missing the little white hose clamp thingy that is over by the radiator cap/PS I believe it holds a vac line....I am going to try and make them.....just seeing if anyone else has the need before I start this project

Its the Vac tube clip that attaches to the small coolant tube that bolts to the plenum, will post pics later

Re: Little White hose Clip thingy
 

I believe this is what you are talking about, Lee (red arrow):

http://i13.photobucket.com/albums/a2...-1LT5Pside.jpg


Only the 91-95 ZR-1's have this. The 90 ZR-1's don't (see pic below). Does anyone know what this extra vacuum line is for that they added?

http://i13.photobucket.com/albums/a2...0LT5Pside5.jpg

Re: Little White hose Clip thingy
 

Thats it!

Re: Little White hose Clip thingy
 

I'll take one. While you're at it, make the black clip that holds the fuel lines bolted to the evaporator case.

Re: Little White hose Clip thingy
 

I would like one of each!

Re: Little White hose Clip thingy
 

Id take at least 3

:cheers:

Rick

Re: Little White hose Clip thingy
 

While you're at it Lee make some of the spark plug wire holders on the rear, I broke one of mine last week. :mrgreen:

Re: Little White hose Clip thingy
 

I'll take a couple - mine is all loose and keeps popping out... errrr.... [-X

Re: Little White hose Clip thingy
 

I believe that is a clip for the vacume line that goes to the charcoal canister for the fuel tank vapor recovery system on the later model LT5's. On the 90 that line comes out behind the A/C compressor and goes to the charcoal cannister under the left headlight.

Re: Little White hose Clip thingy
 

Please put me down for a couple, Lee.

Re: Little White hose Clip thingy
 

Put me down for 10.

Re: Little White hose Clip thingy
 

91's have that...mine's broke too. If you make 50 pcs, that probably wouldn't be enough.

Re: Little White hose Clip thingy
 

I'll take a couple

Re: Little White hose Clip thingy
 

I'll take two, Lee.

Thanks,
Jep

Re: Little White hose Clip thingy
 

Well I have been working on a mold for this clip....then today I am out in the garage and my neightbor asks me to help him with an issue he is having with his Acura. We finish up, and as I close the hood, I go to put the prop back, and there is a nearly identifical clip. Thats why the white clip does not seem to match the LT-5 Engine compartment...its judt a hood clip

So I just need to find the correct hood prop clip....

http://www.thefastenerconnection.com...pRodClips.html


This one looks close

PN#: 14345
Colour: Nylon (white)
Holds Rod Dia: 10mm
Fits Hole Dia: 8mm
Hood Prop Rod Clip
OEM#: 24220-89986

Re: Little White hose Clip thingy
 

Lee been a while did this ever happen I need a few of these. GC

Re: Little White hose Clip thingy
 

I am pretty sure its just a hood prop clip sourced from another car....did not find it....

Re: Little White hose Clip thingy
 

Close....not sure on size...

http://www.ebay.com/itm/Mazda-Ford-N...-/230653464611

This one looks close too

http://www.ebay.com/itm/Toyota-Picku...48bac4&vxp=mtr

Re: Little White hose Clip thingy
 

What is the diameter of the tube and also the hole where the clip is fastened? If your vernier does metric it's generally easier to work with metrics these days.

Hood prop rods are generally larger than I believe required. I'm quite sure I did a GM number for these once but they've been NLA for a while.

Re: Little White hose Clip thingy
 

Does anybody have a close up pic of this actual part. I want to look at Ace and a few help sections.

Re: Little White hose Clip thingy
 

I took mine off before it fell off.What I did was took a black wire tie,looped it from the bottom with just the loop coming up through the hole in the bracket and wrapped that around the VAC line.