Ported Intake
 

I have a fully ported Plenum I/H set ready to go on an exchange basis.

These are 90-92...93-95 are 34mm stock

35mm ball passes completely through on primaries.......

IHs are blasted to aluminum and ready for paint or PC

Can blast plenum also

$700 plus your INJ Housings and Plenum

Shipping not included

35mm fooseball

http://i134.photobucket.com/albums/q...f/DSCN4014.jpg


I welcome questions, but please keep comments not related to sale out

Re: Ported Intake
 

I expect that's probably about the cheapest 30ish HP one can add.

I like this deal - but am putting off for my winter project, will definitely want to discuss options in the fall.

GLWS

Re: Ported Intake
 

Bump

Re: Ported Intake
 

I keep thinking of these but am having a kind of classical year - you know, "baroque". OTOH I did skip buying tires this season so as to be able to address some things on the car.

Can you tell me what the change is from the porting to the head on a 91? By race class rules I can only go 1 inch into the head, and I worry that an aggressively ported IH/Plenum might make too big a step to take up in an inch.

Not to mention how would you go about making the shape to take up the step - a conical hone type of thing??

Has anyone ever bolted the likes of these on a virgin head? What kind of gains can be expected with the stock heads?

I would love to make these work; what the heck the rules allow it.... They'd even save a few pounds up high!

Thanks,
- Jeff

Re: Ported Intake
 

The secondaries start out as 36mm on the cylinder head side. You can do port match and keep it within an inch. It all helps. I had 36mm porting on top end with a port match at the head. Still developed ~399rwhp.

Re: Ported Intake
 

Possible sale pending....but like Lays....we'll make more....

Re: Ported Intake
 

Going to use a local PC guy here, will do AH, Plen, Coolant tubes, IHs for about $150-225.


German Silver

http://i134.photobucket.com/albums/q...cture031-1.jpg

Flat Silver

http://i134.photobucket.com/albums/q...cture030-1.jpg

Silver w/metal flake

http://i134.photobucket.com/albums/q...cture033-1.jpg

Polished Aluminum

http://i134.photobucket.com/albums/q...cture032-1.jpg

Re: Ported Intake
 

Hi:
Do you also do the same for 93-95 (the pre-ported parts in exchange for stock) ?

Re: Ported Intake
 

Do you offer the same type exchange for 93-95?

Re: Ported Intake
 

If I had a set of 93-95 IHs and plenum I would do the exchange, but I do not. And buying a set is pricey....I would be willing to do a set over the winter, but I work and do not want to make a promise I can't keep in terms of time line.

Re: Ported Intake
 

Do you also do heads?

Re: Ported Intake
 

I am doing a set of heads coming out of my 90, so at this point until I know the head, not porting any......see Pete....he is pretty damn good and has some head secrets

Re: Ported Intake
 

Couldn't agree more... Pete is "da man" on heads.

:cheers:

David

Re: Ported Intake
 

so did my ex...

Re: Ported Intake
 

Have a set that should be ready in a week or so..

I have a fully ported Plenum I/H set ready on an exchange basis.

These are 90-92...93-95 are 34mm stock

35mm ball passes completely through on primaries.......

$700 plus your INJ Housings and Plenum

Shipping not included

35mm fooseball

http://i134.photobucket.com/albums/q...f/DSCN4014.jpg


I welcome questions, but please keep comments not related to sale out

Re: Ported Intake
 

They will be done this weekend.....

Re: Ported Intake
 

Sale Pending

Re: Ported Intake
 

Got one going out the door, should have another avvailable in the next 30-45 days, if you are interested let me know.

Re: Ported Intake
 

I concur, That is the one thing my ex did do wright.

Re: Ported Intake
 

1)just wrapped up another set, I believe its sold....I was alittle slow in getting this one done, so waiting to confirm buyer is ready.

2)I already have another IH done so an only a plenum and IH set away from having another one done...let me know if anyone is interested.

3)I also have a IH set already ported with the IH boss taken down greatly on the 2ndry. These require a different injector, which I have the 8 already, if anyone is interested in these, they would flow more than most 36mm ports and would do them + the plenum/injectors for $850.00 on exchange ....these are powercoated silver(never mounted) and could get the plenum PC and or the rest of your parts PCd for a good price.

Re: Ported Intake
 

I have a set of ported IHs, when you port these often you nick the O-ring area....on this set I opened one up alittle more than normal.....but it remains sealed and dones not vac leak, I tested it at 25 mmHG. More of a mental thing I would rather not tell someone after they pay for it...

I will stand behind it 100% for as long as you own the car.

Will do a core exchange at $625....shipped, $100 off the normal cost with shipping

Re: Ported Intake
 

top

Re: Ported Intake
 

Lee Ported my Plenum, Airhorn and IH (Marc H did my TB) - I added 50 RWHP on the dyno after the port - it was was well worth it!

Re: Ported Intake
 

Thanks Glenn!

Re: Ported Intake
 

Finished another one:

http://i134.photobucket.com/albums/q...f/DSCN5104.jpg

Re: Ported Intake
 

Sexy!;)

Re: Ported Intake
 

How much to powder coat it also?

Re: Ported Intake
 

Intake porting $700
Powdercoat: $250 as is
PC with sanding smoother surface $325

Chip: $200 (could be more or less , I would have to source this)

This is about $1-2K less than with most others...

Re: Ported Intake
 

Recently ported and Pcd set for a customer

http://i134.photobucket.com/albums/q...f/DSCN5325.jpg

http://i134.photobucket.com/albums/q...f/DSCN5328.jpg

Re: Ported Intake
 

That's impressive. Was there any other work done? Chip,etc?

Re: Ported Intake
 

Step one; remove small casting imperfections......:mrgreen:

http://i134.photobucket.com/albums/q...icture4368.jpg

http://i134.photobucket.com/albums/q...icture4367.jpg