Headers
 

Has anyone used either of these with good success?

Headers
 

Sorry, I know this does not answer your question. Just in case you are not aware, if you are a Registry member there is a good discount for Stainless Works headers while buying made in the USA.


Sent from my iPhone using ZR-1 Net Registry

Re: Headers
 

Thanks!!! I?ve been meaning to call, I think John, to register.

Re: Headers
 

I was also unaware of this. Can anyone share the process of accessing the discount with Stainless Works?

Is there a forum section / post anywhere that lists any other vendors that offer registry discounts for members?


Sent from my iPhone using ZR-1 Net Registry

Headers
 

Here is how to get the discount from Hans? old post.Attachment 17066


Sent from my iPhone using ZR-1 Net Registry

Re: Headers
 

just be aware that stainless works will only sell headers with cats. i went thru the registry and got mine fabbed up last year, 3" all the way back to the resonator. then i had them jet hot coated.

Re: Headers
 

I do not want cats.

Re: Headers
 

I have the Maximizer headers on my 91. Good quality and fit. I had to dimple #1 pipe to clear the steering shaft. I am in the Akron area if you would like to take a look.

Re: Headers
 

I would actually love to!

Re: Headers
 

I recently installed a set of Maximizers on one of my cars and really like them. The quality was better than the last set of SW I bought. As Mr. Blue said, you need to dimple for the steering shaft a bit. You also need to make the little bracket to offset the dipstick tub. I plan to install a few more sets of them in the future.

As a side note, the OBX catback isn't bad either. You need to replace all the clamps, but the build quality is good.

Re: Headers
 

Anyone have pics of the dimpling you had to do? And I?m assuming it?s better to dimple it before having them coated, or does that not really matter?

Re: Headers
 

Hobbes,

There seems to be car to car variation. I installed OBX headers in 2012 or so and did not have to dimple. My 94 has about 1/8? clearance. Not ideal perhaps but I would get it coated, trial fit and dimple if needed and where it?s needed. Ideal would be trial fit prior to sending it out to be coated but this involves extended down time. BTW - I broieve OBX and Maximizer are the same manufacturer and are almost exact copy (except for collector being moved forward a bit to add fake bullet cats) of Stainless works.

Re: Headers
 

Appreciate the feedback! From my research, OBX and Maximizer are indeed the same. OBX headers are just more highly polished.

Re: Headers
 

Very happy with my OBX. Had to dimple them, no issues with the factory clamps. Paul Workman sold me a dipstick bracket. Also had them coated.

Re: Headers
 

All great info. Thanks!!

Re: Headers
 

Sorry in advance for reviving an old forum.

I just got a set of Maximizer headers but can't find anywhere on the quality of steel. I'm assuming that it is 304 stainless like the OBX but don't want to mount them and then get rust down the line. They feel as if they have a rough high temp paint coating on them because they aren't polished.

If they're 304 stainless then I won't worry about ceramic coat since it's out of my budget now, but if they're not 304, then I'll just save up and wait on install.

Re: Headers
 

Maximizers are stainless with a blasted texture. I had them power coated but it is not required. As I previously stated #1 tube had to be dimpled to clear the steering shaft. Other than that, a good fit.

Good Luck
David

Re: Headers
 

Hello guys

Does OBX still sells headers? I can't find any online.

Re: Headers
 

I don?t see any on eBay.

Re: Headers
 

google 'obx headers' and they will show up. available thru wally world.

Re: Headers
 

https://www.walmart.com/ip/Maximizer...erId=101194874

Says Maximizer but looks to be OBX.

Re: Headers
 

That?s a really good price on those. Years ago when I bought them they were 450. Then not long ago I only saw them over 600. Did the OBX business go belly up and they are liquidating?

Re: Headers
 

That looks like a liquidation price. If you want them, now?s the time. Mine were twice that amount. Good luck!

David

Re: Headers
 

Other sites I see the Stainlessworks headers at $2,200 or so. Jim and I compared OBX and SW headers side by side. They looked identical except for OBX collector being slightly more forward in order to accommodate fake bullet cat looking piece on OBX. Could it be for visual inspection of emission control in some States?

Re: Headers
 

Currently unavailable.

Re: Headers
 

Just received mine. Purchased thru Walmart for less than $350 delivered! Attachment 20302Attachment 20303
Why would you buy anything else?


Sent from my iPad using ZR-1 Net Registry

Re: Headers
 

I wanted to order some from Walmart, but impossible to order from France directly

Re: Headers
 

Here ya go!
https://www.walmart.com/ip/Maximizer...ZR1/2545521324

Re: Headers
 

"Sorry, this item is out of stock"

Those went quick!

Re: Headers
 

Wow Great price I bought two sets on eBay in 2022 for $860 each shipped. Still have one I never installed yet.


Sent from my iPhone using ZR-1 Net Registry

Re: Headers
 

Wow, I got the Maximizers just in time! With shipping mine were only $289 and they arrived this week. I plan to get them high temp ceramic coated and add 200 or 400 cell cats.