Plug wires
I bought a new set of AC Delco wires ( not cylinder numbers) to replace my originals. I took the time to measure each wire to aid in installing the new ones. The problem is, I cant find where I wrote it down. Can anyone measure an original set of wires and tell me how long each wire is and what cylinder it goes to?
Thanks in advance! |
Re: Plug wires
Use at your own risk but....
From Shortest to Longest 7 6 5 8 3 2 4 1 Provided from ZR1Vette: drivers side bank from front to rear: 1 3 5 7 passenger side bank from front to rear: 2 4 6 8 Good Luck |
Re: Plug wires
Or just 'connect the numbers'>>
http://i17.photobucket.com/albums/b7...lpacdetail.jpg drivers side bank from front to rear: 1 3 5 7 passenger side bank from front to rear: 2 4 6 8 |
Re: Plug wires
Quote:
|
Re: Plug wires
I know the wires of non OEM are not numbered, but the OEM coils are thus my 'connect the numbers'
|
Re: Plug wires
Quote:
|
Re: Plug wires
Just slowly relook at my post.. OEM coil pacs with numbers and then what I ID the spark plug sequence per bank. Not trying to make this an issue just making it simple
|
Re: Plug wires
Quote:
It would be nice to have some NOS numbered coils :) :cheers: |
Re: Plug wires
Thanks for the help guys. Listing them from longest to shortest should get the job done. Thanks also for the pictures, I do have a shop manual though. I knew where they went but didnt want to spend a lot of time trying to figure out wich length of wire works best.
|
Re: Plug wires
Quote:
I'm also not trying to make it an issue, just trying to understand what you meant. :cheers: |
All times are GMT -4. The time now is 08:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025