Cam cover vent material
 

Getting ready to put cam covers on. What material do you use for the vent tubes. It looks to be a "scotch-brite" material.

Re: Cam cover vent material
 

https://www.jerrysgaskets.com/filter...t-2-90-95-1b4/

https://cdn10.bigcommerce.com/s-nkg9...0.1280.jpg?c=2

Re: Cam cover vent material
 

I used scotch-brite, the green stuff. Folded it up on itself a few times and secured with the stock wire.

Re: Cam cover vent material
 

I have some that is about an inch thick, from a floor buffer If any one wants some shoot me your address and I will send you some to cut and use,

I have White, green, red and black. The order is fine to course.

ZR1@gmx.com

Pack it in...
 

Layer the Scotch-brite & pack in as much as you can. Will breath fine & will help keep oil in the engine.

Re: Cam cover vent material
 

UPDATE:
Our preferred mist extraction filter.

https://www.jerrysgaskets.com/filter...t-2-90-95-1b4/
http://jerrysgaskets.com/store2/root...s/10135879.jpg

Re: Cam cover vent material
 

Jerry just keeps the parts coming & our cars going

Re: Cam cover vent material
 

I use copper brillo/scubber material you can pick it up anywhere,pack as much as you can.


Al.

Re: Cam cover vent material
 

All,

This is an old thread. Ultimately I replaced the Scotchbrite I originally installed w foam material from Marc Haibeck. Even replacing it in one cam cover was enough to eliminate a persistent oil leak I had when winding the motor beyond 5K.

Re: Cam cover vent material
 

I second the motion ;)

Haibeck Cam Cover Filters