WTB: PCV hose from valves to plenum
 

This is the long piece that runs down the driver's side of the intake plenum. On my car it has two tabs that attach to the plenum. Anyone have one for sale?

I saw Jerry has a take-off one with a single tab, and may go that route if no one's got one.

Re: WTB: PCV hose from valves to plenum
 

yes i have one how about 20 less than jerrys price, no knock on jerry .just dont mwant to gouge you or if thats too much give me a fair price and it is yours . pm me you mailing address and i will get it coming to you tomarrow . you can mail me a ck when you get it and are happy thats what you want

Re: WTB: PCV hose from valves to plenum
 

My 90 has a two tab PCV pipe also - which I believe to be original, yet from Jerry's site the two tab tube would appear to be ioncorrect for a 90?

Re: WTB: PCV hose from valves to plenum
 

both my 90 and 92 had 2 tabs

Re: WTB: PCV hose from valves to plenum
 

Bob,
What happened to your old one?
Can it be repaired?

Re: WTB: PCV hose from valves to plenum
 

I cut it in half and bent it to mount the oil catch can. I'm going to revert that back to OEM configuration:

http://i431.photobucket.com/albums/q.../catchcan1.jpg

Re: WTB: PCV hose from valves to plenum
 

Bob why did the oil catch can not work out? GC

Re: WTB: PCV hose from valves to plenum
 

It worked as designed. I am taking it off to put on the CTS. I'll probably sell the split pipe if someone else wants to run a catch can in an easily reversible way.

Re: WTB: PCV hose from valves to plenum
 

Oh, and on topic, I found a replacement, the one sammy offered up.

Re: WTB: PCV hose from valves to plenum
 

How much for the split pipe?