ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 General Postings (http://zr1.net/forum/forumdisplay.php?f=14)
-   -   SYS light flashing. (http://zr1.net/forum/showthread.php?t=17228)

Z51JEFF 04-18-2012 11:38 PM

SYS light flashing.
 
I get this flashing at times but not constant.I checked for codes but none at present.Its been awhile since Ive used the A-B terminal trick but checked for codes and got a 12 which If I remember correctly is normal.Any clues?

tf95ZR1 04-18-2012 11:52 PM

Re: SYS light flashing.
 
Battery or connections.
I'm no expert, but this is what SYS has been
for me EVERY TIME.

GOLDCYLON 04-19-2012 12:05 AM

Re: SYS light flashing.
 
Battery or alternator. My best guess is battery

scottfab 04-19-2012 01:19 PM

Re: SYS light flashing.
 
Yup, battery. Mine did this both time before replacing it
twice in the last 15yrs.

VetteMed 04-19-2012 03:02 PM

Re: SYS light flashing.
 
A-B only displays ECM codes. SYS flashes when the CCM has a code stored.

VetteMed 04-19-2012 03:04 PM

Re: SYS light flashing.
 
Jump A to G to display CCM codes.

scottfab 04-19-2012 03:41 PM

Re: SYS light flashing.
 
Quote:

Originally Posted by VetteMed (Post 138787)
Jump A to G to display CCM codes.

On a 90 you can get at the ECM codes from the CCM entery.
After in the CCM diag mode press TRIP RESET a few times till
you see 4.0. Then Press TRIP ODD a few times till 4.7 is displayed.
Press ENG/MET and hold till "---" is displayed.
You're there.

GOLDCYLON 04-20-2012 12:51 PM

Re: SYS light flashing.
 
Any update Jeff ?

Z51JEFF 04-20-2012 01:20 PM

Re: SYS light flashing.
 
Quote:

Originally Posted by GOLDCYLON (Post 138883)
Any update Jeff ?

Thanks for all the info guys.I put the charger on the battery for awhile,hope its not a loose cable at the starter:censored:If it persists Im going to do some digging and see what it is by doing the paper clip trick and the process with the buttons on the dash.Thanks again everybody for the info.

Z51JEFF 04-24-2012 02:15 AM

Re: SYS light flashing.
 
Quote:

Originally Posted by scottfab (Post 138788)
On a 90 you can get at the ECM codes from the CCM entery.
After in the CCM diag mode press TRIP RESET a few times till
you see 4.0. Then Press TRIP ODD a few times till 4.7 is displayed.
Press ENG/MET and hold till "---" is displayed.
You're there.

I got into the CCM and I get the ---,if there are no codes stored is this all I will see or is there another step I need to pull the codes?Im still getting the SYS flashing a few times when driving.


All times are GMT -4. The time now is 10:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025