2 sets of Shelby and HRE's 843r
 

Selling some of my sets of wheels.

Set #1 2=18x10 front and 2=18x12 rear this set is new never been mounted and its in original color in perfect condition. The set comes with Carter's ZR1 logo. Price is $1500.00. SOLD...SOLD..SOLD

Set #2 2=18x10 front and 18x12 rear. The center spokes are painted black. They wrapped with summitomo 275/45/18 front about 65% tread life left. The rear have Michelin 335/30/18 not much tread left. One wheel have minor curb rash and one chip. The other three are perfect. Price is $1300.00.

Set #3 HRE's 843R 2=19x9.5 front offset is 59 2=20x11 rear offset is 61. They come with Continental asemetrico tires 265/30/19 and 305/20/20 rear. The tires are almost brand new with over 90% tread life left. Price is $3500.00. This set new over 8k and just one wheel is $1600.00. Anyone interested in these wheels let me know. I will post some pic when i get a chance. I do accept Paypal add 3% or just send it as personal gift. Ofcourse buyers have to pay shipping.
[IMG]http://i142.photobucket.com/albums/r...UT7nYqQ_12.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...USf4pKw_12.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...US2BrDg_12.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...psfb65b325.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...psad6ebaf3.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...psf4264082.jpg[/IMG]

thanks
Shayne

Re: 2 sets of Shelby and HRE's 843r
 

pics of set #1? offsets?

Re: 2 sets of Shelby and HRE's 843r
 

Offsets are perfect for ZR-1's

10' fronts

12' rears

Depending on the brakes, no worries!

:cheers:

David

Re: 2 sets of Shelby and HRE's 843r
 

Info below is from Ron Hanselman ( he is here and CF)

Well I did the test fit and here are the results:

Fronts (measured from brake rotor face to outside lip of wheel)
Stock = 9cm
Shelby = 10cm
Diff = +10mm

Rear (measured same)
Stock = 14cm
Shelby = 15.9cm
Diff = +19mm

Wheels stick out too far so I tried a modification which LocoBob suggested.

I put the center sections on the outside instead of the inside of the wheel joining surface. Center section fits like a glove on either side...

Here are the results:

Fronts (measured from brake rotor face to outside lip of wheel)
Stock = 9cm
Shelby w/mod = 9.3cm
Diff = +3mm

Rear (measured same)
Stock = 14cm
Shelby w/mod = 13.5cm
Diff = -5mm

I added my 1/4 inch spacer to the back:
Stock = 14cm
Shelby w/mod + 1/4 inch spacer = 14.4cm
Diff = +4mm

Re: 2 sets of Shelby and HRE's 843r
 

[IMG]http://i142.photobucket.com/albums/r...elby1front.jpg[/IMG]Just upload some pic ..will try to get more ran out of time. Thanks Jeff for posting the spec.

[IMG]http://i142.photobucket.com/albums/r...by1allfour.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...helby1rear.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...mitomotire.jpg[/IMG]
[IMG]http://i142.photobucket.com/albums/r...elby1rear3.jpg[/IMG]

Had a chance to take some more pic. the camara was not a good one.

Re: 2 sets of Shelby and HRE's 843r
 

Set #1...........Soooooo tempted.................:censored:

Re: 2 sets of Shelby and HRE's 843r
 

Just do it

Re: 2 sets of Shelby and HRE's 843r
 

PM sent...

Re: 2 sets of Shelby and HRE's 843r
 

What zr-1 logo are you talking about

Re: 2 sets of Shelby and HRE's 843r
 

Saving for a big cube motor.............darnittttt!!!!!!!!!!!!

Dymags will have to do for now........