Replica A-Molds
 

Are there any replica A-Molds that are designed for the offset of the ZR1? Most of the replica wheels I see are for camaro's and the regular C4's.

Re: Replica A-Molds
 

In the past there were maybe 2 vendors that did the proper offset for the rears but recently maybe NOT. They're difficult to find. The front of the ZR-1 is the same as the conventional C4 so the 9 1/2" is no problem. The 50mm 11" rears can be used with the addition of a pass-through spacer and longer wheel studs. It's not a difficult change. There are 11" 50mm wheels with the deeper pocket at the lug mount but most that are on the market now have the standard shallow pocket like the 9 1/2" wheels.

Re: Replica A-Molds
 

Contact AFS. They do have A-mold repros that have the correct 56mm front and 36mm rear offsets for the ZR-1. However, the rear does NOT have the deeper lug well of the OEM A-molds.

Re: Replica A-Molds
 

I have a set of the polished AFS wheels that do not have the deep lug well and they look ok but I would like to find some that do.

Re: Replica A-Molds
 

These wheels are pretty cheap, but I want the deep lug wheels so they look correct on the ZR1.

Re: Replica A-Molds
 

I have a few sets and some really nice ccw 505a

PM me if interested

Re: Replica A-Molds
 

The early AFS deep lugs come up once in a while but they have not made the correct 36MM offset for a long time now. Everything out there aftermarket tends to be 50MM GS offset and made in China

Re: Replica A-Molds
 

don't go replica

get the real ones

I have two sets for sale and tires too if needed

if not, it's time to wear out those hoosiers in the nice fall air

get em while they got tread

Re: Replica A-Molds
 

I just bought brand new tires for my Saw Blades. I would transfer the tires over.

Are Grand Sport wheels the same as the ZR1 offsets? My wife thinks the Blacked out spokes would look better on my white car.

Re: Replica A-Molds
 

No they are not 36mm they are 50mm. So wrong offset


I also mentioned that in post #7