Can’t reset ride control codes
 

Driving around Bowling Green with the NCM anniversary, my Service Ride Control light came on. I was just cruising on the freeway and said “darn.” The next day, also just cruising steady on the freeway, the light went off. I love it when things fix themselves J

When I got home, I jumpered pins A and C on the ALDL to see what ride control codes were stored. I got every code! What? Mind you, the light isn’t on, so I guess this must be “history” or something.

I disconnected the battery and still had the same result – all codes.

I followed the reset procedure in the FSM (ground pin C for two seconds and repeat the process a total of three times), and still had the same result – all codes.

This is the same issue rogerzr1 had here
http://www.zr1.net/forum/showthread....t+ride+control
there’s no resolution listed in the thread L

Any ideas?

Gary

Re: Can’t reset ride control codes
 

When the SRC light comes on again then pull the codes. It should not be ALL the codes. Did you change the shocks recently?

Re: Can’t reset ride control codes
 

As it happens, I'm fussing with an intermittent SRC as well. Thought I had if fixed, but it returned the following day. Not having your particular issue with attempting to clear codes, but let's keep in touch. If I discover anything along the way, I'll be sure to let ya know what I find!:cheers:

Re: Can’t reset ride control codes
 

No light on right now, and I haven't changed anything.

Thanks Paul

Re: Can’t reset ride control codes
 

Selective Ride Control Solution TIPS

The FX3 shock actuator deterioration can cause all sorts of intermittent problems :icon_stud

FX3 Selective Rid Control TIPS