Tools to Carry in the ZR-1
 

Tools to Carry in the ZR1 behind the Seats.

Bottom Drivers Side.
Volt Meter, Resistance Meter and 1/4 inch Metric Tools..................1/4 Inch Metric Tools with some additional items noted
http://i287.photobucket.com/albums/l...8e4575cd4a.jpghttp://i287.photobucket.com/albums/l...e93ae85d28.jpg

Second Layer Drivers Side.
Medium Channel Locks, Phillips and Flat Screw Driver, 1/4 Inch Socket Driver with 7mm Socket
(7mm socket used on all the interior Hush Panel and console screws and exterior ECM Chip Cover),
8mm Flex Open End Ratchet
http://i287.photobucket.com/albums/l...6d6be3aed4.jpghttp://i287.photobucket.com/albums/l...5d007da5_1.jpg

Top Layer Drivers Side.
Fuel Pump Jumper and ALDL Code Reader/Eraser .........................Plug in to ALDL and Hold Any Button then turn key on to
.................................................. .................................................. .Read Associated Codes ALDL Fault Code Flasher/Eraser
http://i287.photobucket.com/albums/l...c771b89355.jpghttp://i287.photobucket.com/albums/l...26b74aca15.jpg

Tools to Carry in the ZR-1

Re: Tools to Carry in the ZR-1
 

Bottom Passenger Side................................................... ................Bottom Top Box Passenger Side.
25 ft Nylon Tow Rope, Jumper Cables, Quart AMSOIL 10w-40.........Flex Head Ratchet Set (10mm, 12mm, 13mm, 14mm, 15mm)
.................................................. .................................................. ..(14mm Flex Head Ratchet used on Oil Pan Drain Plug)
http://i287.photobucket.com/albums/l...7c20c1bcb6.jpghttp://i287.photobucket.com/albums/l...dd3b209e4e.jpg
Second Layer Top Box Passenger Side..........................................Top Layer Top Box Passenger Side.
3/8 inch Socket Wrench with 3/8 to 1/2 inch adapter .................long 3/8 inch drive 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
(Belt Tensioner), 3/8 inch drive Torx 40, Short 3/8 inch drive .....Allen for (SS Bolts of TB, Coolant Manifolds, Throttle Cables)
Wobble Extension, Short 3/8 inch drive 6mm Allen
(Cam Covers), Tire Repair Kit, Swivel Spark Plug Socket
http://i287.photobucket.com/albums/l...a983fdcb3c.jpghttp://i287.photobucket.com/albums/l...f1df1fd76d.jpg

Tire Pressure Gauge in the Center Console
http://i287.photobucket.com/albums/l...936e323b68.jpg

Tools to Carry in the ZR-1

Re: Tools to Carry in the ZR-1
 

What? No hammer?
:dancing

Re: Tools to Carry in the ZR-1
 

No Hammer............
I have had everything apart more than once so no hammer needed to break anything loose :D

Did not included the Tow Adapter and Gorilla Lug Wrench which resides beside the Passenger seat

Tow Adapter Stored next to Passenger Seat......................Gorilla Lug Wrench
http://i287.photobucket.com/albums/l...0a983afdc1.jpghttp://i287.photobucket.com/albums/l...d3ecfc7857.jpg

The Tow Adapter is made to engage the 1-1/4 inch square tubing of the frame support under the front of the ZR-1.
http://i287.photobucket.com/albums/l...f395aa62dd.jpghttp://i287.photobucket.com/albums/l...7aed7baba3.jpg

Re: Tools to Carry in the ZR-1
 

Here is one of my favorites:
http://aaagoingplaces.com/acs/pagesm...ds_aaaCard.jpg

Re: Tools to Carry in the ZR-1
 

Break stuff loose?
Hammers are used for applying calibrated mechanical agitation....:dancing

Re: Tools to Carry in the ZR-1
 

If you've ever attended one of Gordon's schools you might have had the opportunity to watch him demonstrate the proper use of a hammer ... I think it was the BFH model.

http://zrwon.com/events/050510/slides/P5100822.JPG

FWIW, he straightened a slightly bent rim ... didn't seem possible, but it worked :cheers:

Re: Tools to Carry in the ZR-1
 

:sign10: And if you screw up with the hammer (or the calibrated mechanical agitation) make sure you have the Triple A Card handy like Phil uses.
And.........you can always take the rims you screw up with a hammer and make great Air Hose Reels out of them........You Guys :D

Merry Christmas guys :cheers:
http://i287.photobucket.com/albums/l...35ca303b4d.jpg

Re: Tools to Carry in the ZR-1
 

Merry Christmas to you Cliff, thanks for all you do for the forum.

Re: Tools to Carry in the ZR-1
 

There's nothing on a Corvette that Gordon can't fix!!!
:)