1990 vs 1991 SIR system questions
I know this has been beaten on before, but I want to know if anything 90 and 91 can be mixed?
not concerned about the Steering wheel at the moment. I am more curious as to the DERM, Wiring harness, Clock Spring, Sensors and the Airbag itself THANKS |
Re: 1990 vs 1991 SIR system questions
Quote:
If a '90 was involved in a collision repair that required an SIR component then the DERM, coil and the airbag would have required replacement. There's no MIXING of those three components. Steering wheel also but you ain't concerned. I understand why. Actually the frame rail sensors are part #'d differently and have different style connectors so could you cut/splice? Well ... I've never and I've no interest in an attempt. |
Re: 1990 vs 1991 SIR system questions
Thanks!!
Every time I do something in depth on this car I find more and more... Dash harness has been spliced in a few spots.. But, I pulled the column yesterday.. found a 1991 wheel, 1991 airbag, which would mean 1991 clock spring.. then I assume a 1991 DERM. |
Re: 1990 vs 1991 SIR system questions
1 Attachment(s)
Quote:
Attachment 5170 '90 connectors aren't displayed as well but in the FSM Book 1 9J-5 has them all. |
Re: 1990 vs 1991 SIR system questions
YEah I don't recall the orange brick in the dash.. I think the DERM is located center of the car near the CCM right?
|
Re: 1990 vs 1991 SIR system questions
Quote:
'91 DERM label likely 1228874 BUT maybe '92 could have been used (I wouldn't think), that might have 16061221, 16176561 OR (but unlikely) 16177277. |
All times are GMT -4. The time now is 03:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025