ZR-1 Net Registry Forums - INFL Rest Bolt Problem

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - INFL Rest Bolt Problem (http://zr1.net/forum/showthread.php?t=26738)

INFL Rest Bolt Problem

Tried to remove the bolts only to have one of them strip into the frame....

should i just cut the bolt head off with a dremel.....I don't want to shake up that

sensor too much.....

Re: INFL Rest Bolt Problem

Quote:

Originally Posted by Chris26 (Post 245335)

Tried to remove the bolts only to have one of them strip into the frame....

should i just cut the bolt head off with a dremel.....I don't want to shake up that

sensor too much.....

That may be your only option at this point. I believe the nuts are spot welded inside the frame. Did the bolt/nut strip or did the spot welds on the nuts break loose? If the latter, hopefully there is a frame hole close by to get a new nut inside the frame.
Rich

Re: INFL Rest Bolt Problem

Yup the spot weld (grommet) is toast...I got the bolt out....