ZR-1 Net Registry Forums - coolant part needed

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Parts For Sale / Wanted (http://zr1.net/forum/forumdisplay.php?f=10)

- - coolant part needed (http://zr1.net/forum/showthread.php?t=2722)

Terry Callihan

01-24-2007 03:41 PM

coolant part needed

I have a minor coolant leak,the piece i need is a 90 degree elbow that hooks to a hose right off the air plenum.the hose looks to be in good shape,but the 90 turns and won't tighten down into the plenum.

65ZR1

01-24-2007 06:15 PM

Re: coolant part needed

I may be wrong on this, but I thought the tubes were pressed in with a bit of sealant. If the tube is still good then pop it out, clean it and put it back with a bit of sealant. Im not sure what sealant the factory used. Hopefully someone can verify. Good lucK!

Jeffvette

01-24-2007 11:01 PM

Re: coolant part needed

Crush fitting. Pull it out, use a little JB weld on it or some kind of epoxy and hope it doesn't blow out at 7,200 RPM.

BTW, the pipe is discontinued.

All times are GMT -4. The time now is 01:31 PM.