ZR-1 Net Registry Forums - Crankshaft, 405 or 427 cu in

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Crankshaft, 405 or 427 cu in (http://zr1.net/forum/showthread.php?t=31165)

alexco

11-17-2019 12:52 AM

Crankshaft, 405 or 427 cu in

Does anyone know if anyone makes the above crankshafts and the rods? Thanks.

A26B	11-17-2019 08:59 AM

Re: Crankshaft, 405 or 427 cu in

Quote:

Originally Posted by alexco (Post 301070)

Does anyone know if anyone makes the above crankshafts and the rods? Thanks.

We use Moldex to make crankshafts and Oliver for rods. You didn't ask but JE Pistons for, yep, you guessed it, pistons.

Jagdpanzer

11-17-2019 09:17 AM

Re: Crankshaft, 405 or 427 cu in

You can get a 4” stroke billet crankshaft from either Muldex or Bryant.

https://moldexcrankshaft.com

https://bryantracing.com

You use small block Chevy rods available from Oliver, Crower, Manley and others.

For my 427 I used a 4” stroke Bryant crank, 6” SBC Crower Maxilite 6” rods, and 4.125” pistons from Diamond.

Sent from my iPhone using ZR-1 Net Registry

All times are GMT -4. The time now is 06:52 AM.