DIY euro tail lights
 

I have always liked the look of the euro taillights decided to make my own. Attachment 14607


Sent from my iPhone using ZR-1 Net Registry

Re: DIY euro tail lights
 

Now to make a functional housing and wiring

Re: DIY euro tail lights
 

Look good. How did you do that?

Re: DIY euro tail lights
 

Lee,the wiring is easy,the wire you need is already in the harness and stops at the rear bulkhead. I got some OEM connectors, installed a terminal in the open cavity in the plug,made the wiring harness for the lights,done. Here's the sketchy part,when your 3rd brake light circuit goes out at the switch,you have no brake lights. I did mine years ago,can't remember every detail but if you need a hand get in touch.

Re: DIY euro tail lights
 

Thanks! might reach out once I get to that point.


Sent from my iPhone using ZR-1 Net Registry

Re: DIY euro tail lights
 

I tapped into the CHMSL circuit for the rear brake signal.

Re: DIY euro tail lights
 

Those look very nice. Printed? I've got a set of those on my 99' FRC my father installed years ago.

DIY euro tail lights
 

You are the man Lee! That is slicker than oyster snoochie! 🤙🏼


Sent from my iPhone using ZR-1 Net Registry

Re: DIY euro tail lights
 

Attachment 14611


Sent from my iPhone using ZR-1 Net Registry

Re: DIY euro tail lights
 

SWEET! You just saved yourself over $400!!


Sent from my iPhone using ZR-1 Net Registry