hood mini shocks
 

Question? On my 1990 ZR-1 I have mounts for two mini shocks. What or
how do you secure them to the mounts. Now some cars do not have the
mounts with studs and you could use bolts and spacers to secure them.
VIN 2546 build date march 1990.
John

Re: hood mini shocks
 

Here is a photo of my 94
Attachment 16519


Sent from my iPhone using ZR-1 Net Registry

Re: hood mini shocks
 

Another view
Attachment 16520


Sent from my iPhone using ZR-1 Net Registry

Re: hood mini shocks
 

My 91 had the studs so I just got the shocks and keepers for a earlier year that they were available on.

Re: hood mini shocks
 

ON mine I have studs on the brackets.

Attachment 16521

hood mini shocks
 

Phil, Do you also run the stock single lift with the additional two small lifts? My understanding is that it is too much lift? I bought the kit for the two small ones about 10 years ago and never installed them. Now that I think about it, it was for my 90 and like John mentioned were studs. Thanks.


Sent from my iPhone using ZR-1 Net Registry

Re: hood mini shocks
 

What year were they available on? I'll keep looking maybe e-clip?
John

Re: hood mini shocks
 

The stock single lift cylinder is still installed .
It was getting weak however, after installing the two small ones they work fine together plus you have the safety stop in case a wind gust comes along.


Sent from my iPhone using ZR-1 Net Registry

Re: hood mini shocks
 

Got it; thanks Phil! [emoji1360]🤙🏼


Sent from my iPhone using ZR-1 Net Registry

Re: hood mini shocks
 

I put the minis on my 91. Held in place with small flat washers and small cotter pins. Easy Peasy. The holes for pins are in the studs. 3 gas struts are great.