Cleaning under plenum
Hi everyone,
I've removed the plenum to switch out the starter motor and there's a lot of thick black grime underneath. Any suggestions for the best way of cleaning there? https://davidmkelly.com/wp-content/u...31_154726w.jpg Also, this plastic clip crumbled when I moved one of the lines. Are they available anywhere? https://davidmkelly.com/wp-content/u...2_161750ws.jpg Thanks Dave |
Re: Cleaning under plenum
I use mineral spirit, a toothbrush and a lot of rags. Once cleaned, fresh injector housing gasket and positive seal at PVC hoses should keep it reasonably clean.
|
Re: Cleaning under plenum
Quote:
|
Re: Cleaning under plenum
Put duct tape over intake ports to prevent anything falling in there. Don?t have an oops.
|
Re: Cleaning under plenum
Thanks, Steve. I did that a couple of minutes after taking the photo :thumbsup:
|
Re: Cleaning under plenum
I'd suggest if you're not in a hurry to get it back together pull everything out off,clean and put it back together.
|
All times are GMT -4. The time now is 05:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025