10 PSI dyno numbers are in...
 

OK here are the 10 psi numbers. We did two back to back and they were within decimals...

616.56 rwhp & 574.97 rwtq

We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds ;)

I want to give special thanks to the following:

Jerry Downey... without him this would not have happened!
Ron Woods
Marc Haibeck
Aaron Scott
Corey Henderson
Gil Nevarez Racing Products (his experience with race applications/mult ovhd cam eng builds/and tuning)

http://www.raptorllc.net/images/LT5/rebuild/10psi.jpg

http://www.raptorllc.net/images/LT5/...d/10psirpm.jpg

Re: 10 PSI dyno numbers are in...
 

Looks good Ron. Can we get a graph mapping RPM instead of MPH?

Re: 10 PSI dyno numbers are in...
 

616 at the rear???!!!! WOW!!!!:mrgreen:

Re: 10 PSI dyno numbers are in...
 

VERY NICE GOOD JOB INDEED

http://www.turbo-power.com/images/frontimg.gif

Re: 10 PSI dyno numbers are in...
 

God bless you! Wow....just wow is all I can think to say on a motor that isn't 100% sorted out yet.:jawdrop:

I hope no one that has ordered a new ZR1 has seen this Ron.:)

Hummmm...lets see, new '09/ ZR1 about 125k out the door.....maybe?

an antique push rod free LT5 in say a fairly low milage, clean ZR-1, say a '90 = around 25k and add your fix to that and by my math you're under a 100k...waaay under 100k total $ spent!

:cheers:
Tom

Re: 10 PSI dyno numbers are in...
 

Most impressive :wave:

Re: 10 PSI dyno numbers are in...
 

Soam Beetch! Nice. Great results :handshak:

Re: 10 PSI dyno numbers are in...
 

Sweet!!!!! let the fun begin!=D> =D>

Re: 10 PSI dyno numbers are in...
 

Awesome! i'm gonna tell SAnta CLaus what i want for Chirstmas.

Re: 10 PSI dyno numbers are in...
 

:cool: Keep us posted on the future results.

:cheers: