New Custom Pistons in my LT5
 

With all the difficulty and headache I have had so far, I thought I would forge my own custom pistons. I was able to do this with the help of a company that originated in St. Louis but is now German owned.

These pistons are heavier than the "Light" versions but I like them, and am working on the third piston as we speak. I hope to have at least 8 done by the end of the night.

They said that these would produce some serious cyldesdales!

http://i134.photobucket.com/albums/q...f/DSCN0139.jpg

LGAFF
92 ZR1
#234

Re: New Custom Pistons in my LT5
 

with the tops down you would have good oil retention inside the new pistons :mrgreen:

Re: New Custom Pistons in my LT5
 

12ozs for pistons, I an polishing off a few 20ozs for liners.

:cheers:
LGAFF
92 ZR1
#234

Re: New Custom Pistons in my LT5
 

Ultralight's !!

Re: New Custom Pistons in my LT5
 

Now those are some "custom" slugs......look to be that new light weight rolled aluminium technology.....brilliant! I'll bet it will run on bio-fuel too!=D>

Re: New Custom Pistons in my LT5
 

i have some experience with that company's products...you should see the power they give in a v12 !!
bj

Re: New Custom Pistons in my LT5
 

I asked the guy is he though they would help be pick up a few tenths, he said yes.....in BAC.

LGAFF
92 ZR1
#234

Re: New Custom Pistons in my LT5
 

custom dish piston tops . could be for a big boost turbo aka beer fart :cheers:. i wonder if the waste gate will melt under all that boost

Re: New Custom Pistons in my LT5
 

unfortunatly those "cans" are only good for bench racing...too bad:dontknow:

Re: New Custom Pistons in my LT5
 

ah yes , and a little fun satire ,brings a smile to ones face