ZR-1 Net Registry Forums - Q: Removing 2ndary shafts?

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Q: Removing 2ndary shafts? (http://zr1.net/forum/showthread.php?t=8320)

Paul Workman

04-12-2009 02:03 PM

Q: Removing 2ndary shafts?

What is the "trick" (besides getting a bigger hammer) to pulling the secondary throttle plate shafts out? :icon_scra I don't want to booger 'em up (if possible), just remove 'em. Any pointers out there?

Thanks in advance.

P.

Pete	04-12-2009 02:49 PM

Re: Q: Removing 2ndary shafts?

Socket,washer over the shaft use the screw to pull the shaft out.
Make sure the socket is bigger then the bearing.

Pete

Paul Workman

04-12-2009 03:01 PM

Re: Q: Removing 2ndary shafts?

Quote:

Originally Posted by Pete (Post 58845)

Socket,washer over the shaft use the screw to pull the shaft out.
Make sure the socket is bigger then the bearing.

Pete

A-Ha!

Thanks Pete!

P.

All times are GMT -4. The time now is 10:37 PM.