Pilot bearing puller
 

Anyone have the name of A Pilot bearing puller that works......

Thanks

Re: Pilot bearing puller
 

Any universal slide hammer set up should work.

Re: Pilot bearing puller
 

http://i10.photobucket.com/albums/a1...IMG_0001-1.gifhttp://i10.photobucket.com/albums/a1...e/IMG_0002.jpg

This is what I made up.....slide hammer from Napa Auto Parts interface slide hammer threads to puller fine threads bolt from general hardware and puller from auto zone. The puller forks will need a little custom filing.

Re: Pilot bearing puller
 

I used this puller from HF that worked perfect after first trying rental puller from Advanced Auto which broke a fork.

http://www.harborfreight.com/cpi/pho...5999/95987.gif

http://www.harborfreight.com/cpi/cta...emnumber=95987

Re: Pilot bearing puller
 

Even better!

Re: Pilot bearing puller
 

Lee I have a basic one in the toolbox that Ive used on the Z a couple times if you need it. I work out of Barrington if your interested.

Re: Pilot bearing puller
 

That Boetch is out! Used the blind puller...thanks for the advice everyone!

Best part is the Crank plug is in place and not moved at all:thumbsup::cheers::dancing