ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   help with #'s (http://zr1.net/forum/showthread.php?t=928)

hihok9 09-29-2005 03:10 PM

help with #'s
 
Trying to make positive ID on year of my motor:

On drivers side rear is MM1220CZA376
On pass rear DF10122145 cast in case

Any help is appreciated, if any another #'s help, let me know. Thanks
Hiho

zr1mom 09-29-2005 06:29 PM

Re: help with #'s
 
Check it out here: http://www.zr1netregistry.com/ZR1_vin.htm

hihok9 09-30-2005 10:32 AM

Re: help with #'s
 
Checked there but my #'s don't seem to match that formula. I did find the partial VIN on vertical part of block by flywheel on pass side
1K5800059
what year does the "K" designate? Also my black book does not list the CZA stamped on drivers side. Again, any help is appreciated, I am buying parts so the year is important. Thanks
Hiho

yellowz 09-30-2005 11:08 AM

Re: help with #'s
 
hey bruce

what i can tell ya may not be to much but looking at the front of the motor so the right side would be on your same side look at the timing cover if the bottom is square its a late 93/95,otherwise its an earlier one.sorry i cant tell ya any morwe than that maybe try gordon or call rich zizza in connecticut hes a bloomington judge who is in charge of the lmsi which covers the zr1.


later
peter:wave:


All times are GMT -4. The time now is 07:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025