View Single Post
Old 02-20-2011   #59
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project

I bought a Timken sleeve kit from RockAuto, and installed it on the yoke. Installed a new seal in the housing, greased the splines, and the inside surface of the seal, and bolted it all back together. We'll see if it begins to leak again. I reset the SRC codes, now down to only four codes instead of 6, so I guess that's some progress. Probably going to drive it to work tomorrow.
VetteMed is offline   Reply With Quote