ZR-1 Net Registry Forums - View Single Post

Hammer · 05-09-2011

I also did not install the spring, but I did install the nylon cover from the original hose. I used zip ties at both ends of the cover to keep it in place. I've replaced hoses on two ZR-1's this same way.

05-09-2011	#4
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,647	Re: Samco coolant hose question I also did not install the spring, but I did install the nylon cover from the original hose. I used zip ties at both ends of the cover to keep it in place. I've replaced hoses on two ZR-1's this same way.