Quote:
Originally Posted by batchman
These are probably a long shot but hey, nothing ventured = nothing gained.
My car is a 91 but I'm looking to back-date my front spindles/hubs so I need the ABS wiring from front sensors to brain for an 88-90 c4 (style with seperate ABS sensor). This is so I can consume $100 hubs instead of $300 hubs. I have the spindles and sensors. So far I've only found the set on eBay but the seller (thankfully) readily acknowledges the connectors are all cracked on his example. Since I need to race in the rain that'd be um, not so good.
Also looking for a 24mm rear bar (from any D44 C4) and since this is a wish list, a hollow front bar and/or some decent end links for front bar would be *awesome*, as would reasonable 2-piece front rotors to fit the J55 brakes.
Almost forgot, need a steering column with no tilt play from any std-trans 91-93 c4, hopefully with the key or lock pulled.
Thanks for listening  ,
- Jeff |
I would contact Dearborn Axle, I have dealt with them in the past and have had nothing but success with every hub or half shaft that I have ever needed.
Phone Number: (313) 583-0000