I have spoken with Rick a couple of times in the past. Hope I can convince him to be a mentor when the arm heals as the plenum is coming off, change out injectors, check the vacuum, check the coils, ect.
Here is my material and tool list, am I missing any thing?
I will use Viton over Buna here is my short list of the items needed to replace the injectors.
http://jerrysgaskets.com/store2/root...&products_id=7
Plenum gasket $23.50
Part #10168684
http://jerrysgaskets.com/store2/root...roducts_id=384
Fuel Injector Seal Kit Lwr Primary VITON - Part#10067600 $21.60
http://jerrysgaskets.com/store2/root...roducts_id=387
Seal Set Fuel Feed &Return Block
$4.65 – Part# 14104675V
Spark Plug Wires $74.25 Part# 12073977
Permabond A136 $37.00 – Part# PB136
AND.... here is a tech data link for info to replace the lower primary injector seal. You can download this to your computer and/or print it out to refer to while you are working.
http://jerrysgaskets.com/store2/root...roducts_id=446
Spark Plugs AC 41-602 gapped at .035 $2.25 a piece
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
Injectors
http://fuelinjectorconnection.com/sh...&productId=208
Part# ZR1oemla $669.00