ZR-1 Net Registry Forums - View Single Post

leonardpower · 10-22-2006

The only way to do a job good it to pull the motor. if it goes well should only take about a day with the right equipment. With the motor out the cam timing can be done far easier than in the vehicle, also the cam covers can be fitted alot easier and less chance of the leaking particuly from the rear sealing plugs. I have seen these screws come out before and unfortunately they tend to get inbeded in the squish area of the head and piston.

10-22-2006	#26
leonardpower Join Date: Oct 2006 Posts: 2	Re: UNLUCKY? The only way to do a job good it to pull the motor. if it goes well should only take about a day with the right equipment. With the motor out the cam timing can be done far easier than in the vehicle, also the cam covers can be fitted alot easier and less chance of the leaking particuly from the rear sealing plugs. I have seen these screws come out before and unfortunately they tend to get inbeded in the squish area of the head and piston.