Quote:
Originally Posted by Route 66
I am looking to replace all the fuel injectors on my 93Z. I want to buy good quality that will last, also that will withstand injector cleaner if I should need to use it sometime in the future. I have read post on this undertaking sometime in the past, I have tried to find those post but have not been able to. One was a well detailed post [ with pictures] on how to remove the plenum an replace the injectors. I have the three red repair manuals they are helpful, but I also find it helpful to read the post on this web site. Some of you have found better ways of makeing a repair an have written good articles on the subject. If you would write a list of what I will need an where I can buy it. I would appreciate any help you might have. I like to buy U.S made if I can. Thanks...E...  |
Not to say your injectors don't need replacing, BUT the issue with alcohol was limited to the 90-92 ZR-1s. 93-95 injectors are immune to the stuff.
As far as needing cleaning goes, I've been using Shell and BP 93 octane and had opportunity to inspect the injectors periodically (doing mods, etc). They have remained looking like NEW! Maybe there's at least something good to be said for the alcohol in the fuel, I guess. Combined with the detergent additives, MY injectors are staying perfectly clean - at least externally.
I went with new Accel injectors from Summit, part # 150821. Two sets of 8 (16 total) run about $589 + shipping.
Welcome to the madness!!
P.