Quote:
Originally Posted by Jagdpanzer
Depends, if you already have 4.00" pistons then taking the liners to 4.010" will result in to much piston side clearence and the liner should be replaced. However if you don't have your pistons yet order a set of 4.010" pistons and have your shop hone out all the liners to give the proper side clearence specified by the piston manufacturer. The LA Sleeve liners have enough material in the walls to safely do this. I have a honing plate you can barrow if you need one.
|
Thanks Phil, I'm going to have Corey put the engine together. I'm collecting parts now and jsut want to make sure I get the right ones. I'm sure Corey H. has the honing plate but if not I'll take you up on your offer.
Kris