Quote:
|
Originally Posted by jonszr1
thanx pards i found those spots and soon as i am done with thisI'll measure. Is there an aprox figure fr to back (for rake) . Proably should do it with a full tank. I think I'm going to really mess with my head and get the lowering kit so I can get the wheel wells filled up . Is an inch ok to lower.??
|
'till you get your manual:
Looking at the car from a side:
Front measuring spot is 652 mm (25 11/16") behind the front wheel centerline.
Rear measuring spot is 486 mm (19 1/8") front of the rear wheel centerline.
Shipping weight: coolant filled to capacity, 5.5 gallon fuel
Curb weight: coolant filled to capacity, full tank of fuel
Front height (at measuring spot):
Shipping weight: 195.1 mm
Curb weight: 193.1 mm
Rear height (at measuring spot):
Shipping weight: 208.8 mm
Curb weight: 199.6 mm
These specs are for a MY95 ZR1.
Warning: if you lower the rear an inch without lowering the front you loose the rake. Not sure what all evil things happen without that.
