Thread: Hi Idle 1K RPm
View Single Post
Old 03-25-2012   #4
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
Default Re: Hi Idle 1K RPm

Quote:
Originally Posted by Don in VT View Post
Hi,

I have found that I have developed a high idle and I was wondering if a VERY loose rubber dual PCV valve connector could be the cause of the high idle speed ( 1K RPM). The rubber connecor is sloppy loose with almost no sealing to the PCV valves.

I would guess that the connector is very hard to find so has anyone come up with an alternative (besides the oil catch can) to replacle the connector ?

Thanks,

Don in VT

Don,

Absolutely it will cause a high idle. Several ways to help seal that using zip ties and sleeving the PCVs. I also have spare PCV hoses available.
Finally, check TPS voltage and Min Air Adjustment.

Last edited by XfireZ51; 03-25-2012 at 11:46 AM. Reason: PVC is for the house.
XfireZ51 is offline   Reply With Quote