ZR-1 Net Registry Forums - View Single Post - Almost BG bound-Need help AGAIN

XfireZ51 · 05-07-2012

On the crankcase vent, I would suggest using the material Marc H has rather than scotchbrite. I went thru this last year. CC was pressurizing at WOT. I was getting a slight pooling of oil at the cam cover bolt head adjacent to the vent tube boss. Also, oil on oil pan stud at front corner of pan on passenger side.

05-07-2012	#31
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Almost BG bound-Need help AGAIN On the crankcase vent, I would suggest using the material Marc H has rather than scotchbrite. I went thru this last year. CC was pressurizing at WOT. I was getting a slight pooling of oil at the cam cover bolt head adjacent to the vent tube boss. Also, oil on oil pan stud at front corner of pan on passenger side.