Quote:
Originally Posted by Z51JEFF
Well,I could if I actually had the wiring harness in the car.Wont be ready for that for awhile.Im just now building the rear light harness and Ill put the setup in the car hopefully in a few weeks.
|
According to bulb specs, both the stop and tail lights are 7W ea. Even if you're running both on a single 16 ga wire (0.0402 ohms/10ft) the current draw would be 14W/12V = 1.16A; well under 2A. You won't have a problem at 2 or 3 times that (1.16A) current. AND, if you're running one element only as a brake light the stock tail and brake circuits are unchanged anyway. I think you be good either way, if I understand what you're doing.
P.