Quote:
Originally Posted by BlackbirdZ07
Well, I got the codes cleared. I don't know exactly what worked, but I kept doing different things (including the procedure above) and I finally figured out that I had cleared all the codes except one: code 14, which is the right front. I think the codes were cleared but then 14 reset every time I turned the ignition on.
So I removed the actuator... shock gear and actuator looked fine, but actuator did not move when I turned the key on. Bad actuator?? To test that, I removed the actuator, disconnected the left front actuator and plugged the suspect actuator into the left front connector. Low and behold, it moved when I turned on the key... so the actuator is NOT bad. It's not getting power for some reason. Any ideas?
|
That would point to an open or short in the wiring prior to the actuator connector. Or, a bad module behind the driver's seat.