Quote:
Originally Posted by tccrab
Found this tidbit on a Canadian StripClub bathroom wall:
code 76 is lateral accelerometer. He needs to remove it and whack it in his hand to make sure the pendulum on the inside is loose. Otherwise it needs to be replaced.
You can clear the codes on the ALDL connecter. Page 5E1-3 gives you the proper sequence for grounding.
The only codes you can not clear with the ALDL are 41,45,55,61,63.
'Crabs
|
You can't "replace" the lat sensor because there are none available. If your lat sensor is bad, the best you can hope for is to find a good used one. Fortunately, ZR1 lat sensors are the same as base C4 lat sensors. When looking for a used unit, get one from a 90-93 model year ZR-1. The 94-96 sensor is different.