ZR-1 Net Registry Forums - View Single Post

rkreigh · 01-12-2007

contact marc haibeck. I believe what he does is unhook one of the lines from the oil cooler and uses a pump to pressurize the system. it's pretty EZ but requires a $50 tool.

he can hook you up. another "not so good" way to do this is to pull the ecm fuse and let the engine turn over without starting.

the priming method is much better imho. just don't get the car too full of oil.

good luck!!

01-12-2007	#2
rkreigh Join Date: Jan 2004 Location: Alex VA Posts: 1,080	Re: Oil Priming contact marc haibeck. I believe what he does is unhook one of the lines from the oil cooler and uses a pump to pressurize the system. it's pretty EZ but requires a $50 tool. he can hook you up. another "not so good" way to do this is to pull the ecm fuse and let the engine turn over without starting. the priming method is much better imho. just don't get the car too full of oil. good luck!!