ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 09-25-2012

WJust some camparison of the Z06 and Brembo rotors

Here's the diameter difference

And here is the height difference. Its about 1.5". Square is resting on top of Brembo rotor hat surface. This is one reason I went to the Z06 rotors. The Brembo is a taller rotor and so pushed out the Z06 wheel further past the fender line. I did a quick test fit and the Z06 wheel will be nearly flush with the fender.

09-25-2012	#8
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Z06 Brakes getting ready for install WJust some camparison of the Z06 and Brembo rotors Here's the diameter difference And here is the height difference. Its about 1.5". Square is resting on top of Brembo rotor hat surface. This is one reason I went to the Z06 rotors. The Brembo is a taller rotor and so pushed out the Z06 wheel further past the fender line. I did a quick test fit and the Z06 wheel will be nearly flush with the fender. Last edited by XfireZ51; 09-25-2012 at 08:09 AM.