Quote:
Originally Posted by rkampf
Any chance you can give a quick description on how to flush/bleed the system. Ive just had my clutch fail (very low mileage) and my reservoir is low. I'd like to bleed the system before trying anything more extensive.
|
Depending on how much of a hurry you are in you can do it similar to
bake bleeding (some one press while someone else crass open the bleeder
valve on the slave cyl.)
Or you can fill the master res and then crack the bleeder on the slave cyl and let it drip keeping the master cyl full.
Once the fluid goes clear you done. Close the bleeder.
The challenge you'll have is cracking loose the bleeder.
If it refuses to budge you'll likely have to clamp on a visegrip to loosen it.