ZR-1 Net Registry Forums - View Single Post

Lawdawg · 03-01-2007

Thanks for all of the information so far. I have since checked all of the plugs, connections, and fittings and have found no issues. The car is a 1991, so problems with injectors along with fuel/injector cleaner alcohol content seems like a possible culprit.

The condition seems to really present itself when the motor is cold and not up to temp. The problem is when the sputtering or bogging stops, the flywheel rattle continues at idle or when you shut her down.

I dont know, maybe a fuel pump or filter?

I dont have a scaner, but I will attempt to do a spark test next. I should have paid attention in shop class when I was younger, I'm not certain I even know what I'm looking for. Sorry guys, I just like to drive fast!

Z-Factor, do me a favor and check with your contact in Miami about him being able to take a look at it. I had planned to take it to Roger at Horsepower Sales in Pompano for a fidanza, ceramic clutch, and 3:91s, but wonder if I should wait to have this issue resolved first.

03-01-2007	#5
Lawdawg Join Date: Jan 2007 Location: WPB Florida Posts: 10	Re: Did fuel injector cleaner cause problem? Thanks for all of the information so far. I have since checked all of the plugs, connections, and fittings and have found no issues. The car is a 1991, so problems with injectors along with fuel/injector cleaner alcohol content seems like a possible culprit. The condition seems to really present itself when the motor is cold and not up to temp. The problem is when the sputtering or bogging stops, the flywheel rattle continues at idle or when you shut her down. I dont know, maybe a fuel pump or filter? I dont have a scaner, but I will attempt to do a spark test next. I should have paid attention in shop class when I was younger, I'm not certain I even know what I'm looking for. Sorry guys, I just like to drive fast! Z-Factor, do me a favor and check with your contact in Miami about him being able to take a look at it. I had planned to take it to Roger at Horsepower Sales in Pompano for a fidanza, ceramic clutch, and 3:91s, but wonder if I should wait to have this issue resolved first.