[A26B]

Originally Posted by Funracer

Hi Lee

No idea how to check my knock sensor board. Did swap chips with
a friend and no change. Going to pull the sensor and Ohm check it.

Plenum and IH's come off this week as we discussed. My son pointed
out that the valve covers will look like cr*p now by comparison so those
might have to go as well. I have never pulled them so will be searching the
forum to educate myself before it happens.

Got a laundry list of things to do while I wait for the plenum. I am going to
start a new thread for the project with lots of pics.

I will get back to you later this week.

Funracer (Neil)

We stock the famous "Lingenfelter LT5" engine paint in rattle cans, as well as all the gaskets & seals, Stainless Steel top end bolt kits, plus a very large inventory of new & used parts. Different levels of "Combo Kits" for the most common LT5 maintenance are also available.

http://jerrysgaskets.com/store2/root...roducts_id=658

http://jerrysgaskets.com/store2/root...index&cPath=27

http://jerrysgaskets.com/store2/root...ex&cPath=19_20


Jerry