ZR-1 Net Registry Forums - View Single Post

Starman · 02-26-2013

It will be plugs or injectors. Injectors must have 14 ohms, any less and they are on their way out - replace the entire set when needed - trust me it will save a lot of frustration down the road.

The guys are also right about the plugs, use only the correct AC plugs with the stock coils - fancy, multiprong plugs can cause misses. Always seal your plug boots with dielectic grease.

Good luck

02-26-2013	#7
Starman Join Date: Sep 2008 Location: Speedway, IN Posts: 140	Re: Need Advice: Miss, low rpm stumbling It will be plugs or injectors. Injectors must have 14 ohms, any less and they are on their way out - replace the entire set when needed - trust me it will save a lot of frustration down the road. The guys are also right about the plugs, use only the correct AC plugs with the stock coils - fancy, multiprong plugs can cause misses. Always seal your plug boots with dielectic grease. Good luck