View Single Post
Old 03-06-2013   #7
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,404
Default Re: Plenum pull advice

Quote:
Originally Posted by mgbrv8 View Post
I know there is one behind the intake near the firewall. But I was referring to the one under the computer and above the battery.

Dave
The one you are referring to, under the ECM (later moved to underside of plenum, forward of DIS Module) is an MDP Sensor, Manifold Differential Pressure. They look alike, but are not interchangeable. In fact, the harness plugs will not interchange, i.e. you cannot plug a MAP sensor at the MDP location nor an MDP sensor at the MAP location.

We stock both sensors. If you want to see them, go to the web store & search by the PN's.

You can tell them apart visually if you know what to look for.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote