View Single Post
Old 03-12-2013   #45
mgbrv8
 
Join Date: Jul 2009
Location: Texas
Posts: 790
Default Re: Plenum pull advice

Thanks Hammer shes coming along nicely. Today I jumped in and started cleaning the carbon particles out of the lines. This became a lot more of a job than just an air hose and a vacuum it took alot longer then i thought it would. lts Because of the particles shape they would pack in and tighten up into tight little blocks So I had to completely remove the lines and system out of the car Once the line was out I could tap it on the obstructed areas and finally break loose all those particles and then they could be blasted out with the air hose. I also attached some pictures of All my vacuum plumbing to see if I missed anything important.

Dave
Attached Images
File Type: jpg 1 (141).jpg (82.7 KB, 63 views)
File Type: jpg 1 (139).jpg (81.9 KB, 64 views)
File Type: jpg 1 (142).jpg (98.0 KB, 85 views)
File Type: jpg 1 (143).jpg (89.9 KB, 61 views)
File Type: jpg 1 (145).jpg (57.2 KB, 58 views)

Last edited by mgbrv8; 03-12-2013 at 09:58 PM.
mgbrv8 is offline   Reply With Quote