Quote:
Originally Posted by mgbrv8
Im sure once I finish up I will work on better write ups. Now Hammer was the one that suggested replacing the vac can for the secondaries and Im glad he did I opened up my can and it was a mess also the one way valve had a weak leak. Is there any inline Vac filter I could get to keep the contaminants out?
Dave
|
Thanks John (Hammer) for that suggestion......
What are the contaminants in the Secondary Vacuum Reservoir?
Where do the contaminants come from? (Sucked in at the leaks?, failed Vacuum system components?).
Unlike Contaminants in the Fuel EVAP Purge System which come from a failed Charcoal Canister itself.....
Charcoal canister replace
Secondary Vacuum System
Quote:
Originally Posted by mgbrv8
I also attached some pictures of All my vacuum plumbing to see if I missed anything important.
Dave
|
I do not think you missed anything at all. I see you have ties on ALL the secondary vacuum lines
Check those secondary canisters for smooth operation. You can just apply a vacuum to the cannisters with plenum off to see if the canisters and secondaries function/open smoothly.
Cliff