View Single Post
Old 03-17-2013   #54
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,817
Default Re: Plenum pull advice

Quote:
Originally Posted by mgbrv8 View Post
From what people have said its hard to purge the air out of the water pump between the inlet and outlet of the pump. So it eliviate any unwanted air I drilled a and tapped a pipe plug in the water pump so I dont have any air pockets.
That actually will work

An extreme measure but a good one as there is no other way to be sure you get that air out of an air locked water pump other than blowing it out (actually blowing coolant into the water pump area) from drivers side with long radiator hose connected to Drivers side Injector Housing Manifold. With your modification we know we got the air out and we did not blow that water pump air into the passenger side Injector Housing

See Filling With Coolant and the Air Locked Water Pump

Last edited by Dynomite; 03-17-2013 at 11:44 AM.
Dynomite is offline   Reply With Quote